How to enter unlock codes in Blackberry models
Blackberry OS10 Unlock Instructions
1. Go to Settings > Security and Privacy > SIM Card
2. Scroll down to Phone Network Lock, and tap the Unlock Network button
3, Enter your unlock code, and hit OK
4. Phone should be unlocked.
Other Blackberry Unlock Instructions
When you receive your code it will be in one of two formats (depending on your model)
Format 1: A single string of 4 or 5 long numbers
If you receive Format 1, then these are simply 4 or 5 codes that need to be tried. (So when you are asked to enter the unlocking code, you need to try each one, starting with the 1st)
Format 2: Again a string of numbers, but with some identifying letters between them (EG MEP/NCK etc)
If you receive Format 2, then please refer to the table below for your code.
Here’s an example of how your code will break down:
SIM Code = MEP1
NCK Code = MEP2
Subset Code = MEP3
Prov Code = MEP4
Corp Code = MEP5
Note: BlackBerry in 90% of countries will only require the MEP2 code
Also, Please make sure the wireless mode is turned off before attempting to unlock your Blackberry phone
Unlock Method 1 for most BlackBerry models
1. Turn on your phone with a SIM Card not from the original network
2. If the phone asks, enter the PIN code for your SIM Card
3. Next, the phone will ask you to enter your NCK unlocking code*
4. Your BlackBerry phone will now be unlocked
* If after entering code, the MEP box remains, try entering MEP4
Unlock Method 2, please choose device type below
| Instructions For Blackberry With Full Keyboards |
Instructions For Blackberry With Small Keyboards |
Instructions For Blackberry With Touch Screen Keyboards |
 |
 |
 |
| 1. Insert any SIM card 2 From the menu go to Settings 3. Next Advanced Settings 4. Next SIM card 5. Type ‘M E P D’ (this will display the active lock) 6. Type ‘M E P’, then next hold down the Alt key and press 2 (See image) 7. Next you’re prompted for the Network MEP code (it will also state how many attempts are left) 8. Enter the code 9. Press tracker ball/Return/Enter to accept 10. The device should now be unlocked (When entering MEP etc, you may have hold caps down on some models) |
1. Insert any SIM card 2. From the menu go to Settings 3. Next Advanced Settings 4. Next SIM card 5. Type ‘M E P P D’ (this will display the active locks on your phone) 6. Type ‘M E P P’, then next hold down the Alt key and press 2 (See image) 7. Next you’ll be prompted for the Network MEP code (it will also state how many attempts left) 8. Enter the code 9. Press tracker ball/Return/Enter to accept 10. The device should now be unlocked (When entering MEP etc, you may have hold caps down on some models) |
1. Insert any SIM card 2. From the menu go to Settings 3. Next Advanced Settings 4. Next SIM card 5. Press the Blackberry button and show keypad 6. Hint: turn phone on it side to show a full keypad (See image) 7. Type ‘M E P D’ (this will display the active lock) 8. key in ‘M E P 2′ (pressing the number button to get 2) 9. Next you’re prompted for the Network MEP code (it will also state how many attempts left) 10. Enter the code 11. Press Return/Enter 12. The device should now be unlocked (When entering MEP etc, you may have hold caps down on some models) |
Unlock Method 3 (if 1 or 2 not worked)
1. Go to Settings Menu, SIM card and press select
2. While holding down the ‘Shift’ key type ‘MEPD’
3. You should now see five locking categories listed
4. While holding down the the SHIFT KEY, type ‘MEP2′
5. Next, release the shift key.
6. You will now be prompted to enter the Network MEP code (stating how many unlocking attempts are left)
7. Enter the code
8. Return/Enter
9. The device should now be unlocked
9105 Input Instructions
9105 are a strange breed when it comes to entering unlock codes
there are 2 keypad types and one doesnt have an alt button.
what to try first is put a sim in that it wont take and it may simply ask you for the code.
If not then follow this guide:
1. Put a different network sim card
2. Turn on the phone completely
3. Now turn OFF all connection (wifi,mobile etc)
4. Now go to Settings Then Advance Setting Now Go to Sim Card
5. Now Enter MEEP2
Simply Enter MEEP on keypad and for entering 2 follow these steps
The 9105 doesn’t have an ALT key, however you can put it into ALT mode. To activate ALT mode you must do the following: Press the right side Volume keys in the following sequence: up, down, up, down, up. The Alt icon should display in the top left corner of the screen. Note: If you press the Shift key it disables the ALT mode so it’s impossible to enter ALT-SHIFT-H.
6. Now Enter code
7. Phone should be unlocked
Please Note – On most phones you are limited to only 10 attempts, if you run out of attempt you will block the handset which means it could only be reset by a RIM authorised service centre
Regards,
Mobicode Support